Stump Grinding In Leicester

The price will vary depending on the size of the stump, condition, and whether we have easy access to it or not. But normally we can get the job done for about £100 – £300. You find our prices here.

The cheapest way to remove it is often a DIY approach, such as manual digging or using chemicals. Digging out a small stump with a shovel, axe, and mattock costs little if you already have the tools, though it’s labor-intensive. Chemical removers, like potassium nitrate (£8–£20 per product), accelerate decomposition over weeks or months, offering a low-cost option for those not in a hurry. Burning is another inexpensive method but is restricted by local regulations due to fire risks.

We accept bank transfers, cash, and in some cases debit and credit cards. 

Yes, should you want us to remove more than one, or want additional services like tree removal, pruning, etc., we will probably be able to offer you a discount.

For manual removal, you’ll need a shovel, axe, mattock, and possibly a saw for cutting roots. Stump grinding requires a grinder (available at home improvement stores for $100–$200/day). Chemical removal needs a drill, chemicals remover, and protective gear. Burning requires kerosene or fuel and a drill to create holes for ignition. A chainsaw can help cut it lower to the ground for any method, and gloves and safety glasses are essential for protection.

The time required varies by method and stump size. Professional stump grinding typically takes 1–3 hours, depending on size and access. DIY grinding may take longer, especially for beginners, often 3–6 hours. Manual digging can take 4–12 hours, while chemical rotting requires weeks to months for it to decompose fully. Burning can take a few hours but requires preparation and monitoring for safety.

It is a process where a machine called a stump grinder uses a rotating cutting disk to chip away at a tree stump, reducing it to wood chips and sawdust. The grinder, operated by professionals or rented for DIY use, cuts it down to 20-30 cm below ground level, leaving the roots to decompose naturally. It’s efficient, typically taking 1–3 hours, and minimises lawn disruption.

It is often preferred for its speed, efficiency, and minimal environmental impact compared to other methods like digging or burning. It’s faster than chemical rotting (hours vs. months) and safer than burning, which poses fire risks. Unlike manual digging, grinding doesn’t require extensive physical labor or large holes that disrupt the lawn.

Roots vary widely by species and size, but most extend 1–2 feet deep for small trees and up to 3–5 feet for larger ones. Taproots, common in species like oak or pine, can go deeper, sometimes 6–10 feet, while shallow-rooted trees like maples spread wider than deep. Stump grinding typically removes the top 20 – 30 cm, sufficient for most landscaping needs, but complete root removal may require digging or professional equipment for deeper systems.

No, stump grinding does not remove the entire root system. The process uses a machine to grind the visible stump and some of the main attached roots down to a depth of 20 – 30 cm below ground level. This effectively eliminates the above-ground stump, allowing the remaining roots to decay naturally over time. Complete removal, which is a more extensive process involving the use of heavy machinery to dig out the entire root network, is necessary only in specific situations.

Most stumps won’t grow back into a tree. However, some species, like willows or poplars, can sprout from remaining roots, especially if not fully removed. To prevent regrowth, cover the stump with a tarp to block sunlight. Also, grinding below the soil line or removing the root system entirely ensures no regrowth occurs.

In Leicester, you typically do not need a permit to remove a stump itself, as it is not considered a living tree. However, it is crucial to first verify if the tree it came from was protected by a Tree Preservation Order (TPO) or was located within a designated Conservation Area. In these cases, it is a legal requirement to obtain permission from the local council, either Leicester City Council or Leicestershire County Council, before removing the stump. Failing to do so can result in significant fines. To be sure, you should check the council’s interactive maps or contact their planning department to confirm the status of the tree.

Yes, you can plant a new tree where a stump was removed. Make sure to fill the hole with good quality soil and you can plant a new tree that should have the proper conditions to grow.

Removing a stump near a fence or building is possible but requires caution to avoid damage. Grinding is often the best method, as it’s precise and minimises digging that could disturb foundations or fence posts. Professionals use smaller grinders for tight spaces and check for underground utilities first. DIY attempts risk hitting pipes or destabilising structures, so hiring an expert is recommended for stumps within a few feet of buildings or fences.

Before starting any removal, we carefully check for underground utilities such as water pipes, gas lines, and electrical cables. If there is a risk of conflict, we use specialised equipment and techniques to remove the stump safely without disturbing nearby infrastructure. In some cases, we may recommend a shallower grind or an alternative method to protect underground services. Safety and property protection are always our top priorities.

You likely need professional removal if the stump is over 25 cm in diameter, has deep or extensive roots, or is near utilities, buildings, or fences where DIY methods risk damage.

Yes, we are happy to give you a free quote. Just ask us for a free inspection and we will come out to assess the job and give you a free quote. Alternatively, you can send us images or a video of the stump. In many cases we can price the job on this.

When using a stump grinder, the process typically causes minimal damage to your yard or lawn, but some impact is possible depending on the equipment and conditions. A grinder reduces the stump to wood chips, creates a small hole 20 – 30 cm deep, and preserves most of the surrounding grass.

No, you don’t necessarily need to be home while we carry out the work, as long as we have clear access to the site. Many of our customers choose to be away during the job. However, if you prefer to be present or would like to discuss specific details in person, we’re happy to arrange that. Either way, we’ll complete the work safely, efficiently, and leave the area tidy when we’re done.

Yes, you can find our client reviews here.